Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Reinforced Crossmember Support. 1/4-Inch Stamped Alloy. Rust-Proof Armor.
Ultimate Protection for Your Ranger's DrivetrainThe RIVAL Aluminum Transfer Case Skid Plate is engineered specifically for the 2024-2026 Ford Ranger and Ranger Raptor. In the world of off-roading, the transfer case is a critical "pinch point." A single high-center event on a jagged rock can crack the case, leaving your vehicle immobile and resulting in a catastrophic repair bill.
Engineered in Houston, TX for U.S. applications, this skid plate is made from 1/4-inch (6mm) deep-stamped aluminum alloy. Unlike standard flat plates, RIVAL uses a stamping process that increases structural rigidity while keeping the weight down to just 20 lbs.
The Problem & The Solution:The Pain: The factory Ford "protection" is often a thin steel cover that lacks internal support. On impact, it easily flexes upward and hits the transfer case itself, causing the very damage it was supposed to prevent.
The RIVAL Solution: We include a reinforced crossmember that provides an additional support point. This ensures the skid plate stays rigid and maintains a safe distance from your transfer case even during hard hits.
Key Features: RIVAL Drivetrain Armor
Includes a dedicated support crossmember to prevent the plate from flexing into the transfer case under heavy loads.
Constructed from heavy-duty 6mm aluminum, offering maximum impact absorption at only 20 lbs total weight.
Utilizes existing factory mounting ports for a 100% bolt-on assembly. No drilling or permanent vehicle modifications required.
The stamping process adds structural ribs, making this plate significantly stiffer than traditional flat aluminum shields.
Marine-grade aluminum is naturally corrosion-resistant. It will never rust, even if the surface coating is scratched on rocks.
Laser-cut for a perfect fit to the 2024+ Ford Ranger chassis, ensuring full coverage with a clean, low-profile look.
Proudly engineered in Houston, Texas, specifically for the North American market Ford Ranger and Raptor models.
Includes drainage slots to prevent the buildup of mud and water, keeping your drivetrain clean and dry.
Designed for Heavy AbuseStandard skid plates rely on the thickness of the metal alone. RIVAL takes it further by combining marine-grade aluminum with structural stamping and a reinforced crossmember. This kit is designed to survive the harshest washboard roads and technical rock crawling without compromising your truck's ground clearance.
20 lbs Total Weight 6mm Alloy Thickness USA Houston Engineered Alloy Marine Grade
"The factory steel plate on the Ranger is basically a piece of sheet metal. It's too thin to stop a real rock. I swapped to the RIVAL because of the extra crossmember support. The fit is perfect, and it doesn't rattle at all on the highway. Install took maybe 30 minutes in the garage."
- Greg S., Ranger Raptor Owner Installation Best PracticesClean Assembly: It’s good practice to use a tap on all included hardware and bracketry to ensure ease of final assembly. This ensures threads are clean for a perfect, secure fit during the bolt-on process.
*Repair costs are estimates. Puncturing a transfer case results in immediate loss of drive and oil pressure.
| Feature | RIVAL 6mm Aluminum | OEM Steel Cover |
|---|---|---|
| Support | ✓ Reinforced Crossmember | ✗ No Internal Support |
| Thickness | ✓ 1/4" (6mm) Heavy Duty | ✗ Thin Sheet Metal |
| Impact Gap | ✓ Maintains safe case clearance | ✗ Flexes into the case |
| Rust Protection | ✓ Rust-Proof Alloy | Basic Zinc/Paint |
| Weight | ✓ 20 lbs (Lightweight) | ~12-15 lbs |
Specifically engineered for the North American T6.2 platform. Fits the following generations:
2024-2026 Ford Ranger (All Trims) 2024-2026 Ford Ranger RaptorNo-Drill Setup: Works with both factory suspension and most leveling kits. Engineered to provide maximum clearance for technical off-road driving.
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
No. Because it is made of high-quality aluminum, it is naturally rust-proof. Unlike steel skids that require repainting after every scratch, this plate will never corrode.
The Ranger's transfer case is in a sensitive position. A reinforced crossmember adds a vital structural support point that prevents the plate from bowing upward into the case during a direct rock impact.
No. The RIVAL Transfer Case Skid Plate is a 100% bolt-on system. It installs directly into factory mounting ports on the frame.
Yes. This plate is engineered to fit the entire 2024+ Ford Ranger lineup, including the Raptor, specifically for the North American chassis configurations.
The total weight of the plate and reinforced crossmember is approximately 20 lbs, making it significantly lighter than heavy steel alternatives.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
