Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
1/4" Deep Stamped Alloy. Lightweight 26 lbs. 100% Bolt-On Security.
Bulletproof Your Ranger's Fuel SystemThe RIVAL Aluminum Gas Tank Skid Plate is essential armor for the 2024-2026 Ford Ranger. Your fuel tank is a massive target for jagged rocks and high-centered logs. A single puncture doesn't just end your weekend—it creates a dangerous and expensive recovery situation.
Engineered in Houston, TX for North American Ranger applications, this plate is made from 1/4-inch (6mm) deep-stamped aluminum alloy. It provides the heavy-duty impact resistance you need for overlanding and rock crawling without the fuel-draining weight of steel.
The Problem & The Solution:The Pain: Factory fuel tank protection (even on FX4 trims) is often insufficient for serious impacts, and heavy steel plates can cause rear-end sag and reduced payload.
The RIVAL Solution: We provide a Lightweight 26 lb shield that is deep-stamped for extreme structural rigidity. It is 100% rust-proof and installs with zero drilling or cutting.
Key Features: RIVAL Gas Tank Armor
Constructed from 6mm thick aluminum for maximum durability. It provides high impact resistance while remaining lightweight.
Designed for a 100% bolt-on assembly using factory mounting points. No permanent vehicle modifications required.
The stamping process adds structural ribs, making the plate significantly more rigid than standard flat-sheet designs.
Aluminum naturally resists rust. This plate will never corrode, even if the coating is scratched on technical trails.
Proudly engineered in Houston, Texas, specifically tailored for the North American Ford Ranger platform.
Hardware is recessed and protected to prevent bolt heads from being sheared off during off-road driving.
At only 26 lbs, this plate provides superior protection without the heavy penalty of steel aftermarket skids.
Finished in a Matte Metallic Silver powder coat over a zinc primer for maximum durability and a clean look.
Superior Underbody EngineeringWe don't cut corners. The RIVAL Gas Tank Skid Plate features heavy-duty aluminum alloy construction that is up to 30% lighter than steel. Our deep-stamping technique ensures that the plate can withstand high-energy impacts while maintaining its shape and protecting your fuel supply.
26 lbs Lightweight 1/4" 6mm Thickness Alloy Marine Grade Bolt-On No Drilling
"The peace of mind this plate gives is huge. I do a lot of desert overlanding and the factory 'shield' didn't inspire confidence. The RIVAL plate fits like a glove on my 2024 Ranger. It’s light enough that I didn't feel it in the suspension, and the install was truly bolt-on."
- Derek L., Ranger FX4 Owner Fitment & Installation NoteNote for Raptor Owners: This specific skid plate does NOT fit the 2024-2026 Ranger Raptor. Please check the Ford Ranger Raptor Gas Tank Skid Plate for proper fitment. For the smoothest installation, we recommend using a tap on all included hardware to ensure clean threads.
*Repair costs are estimates. Puncturing a gas tank on a remote trail is a trip-ending emergency.
| Feature | RIVAL 6mm Aluminum | Typical Steel Skids |
|---|---|---|
| Weight | ✓ 26 lbs (Ultralight) | ✗ 45+ lbs (Heavy) |
| Rust Resistance | ✓ 100% Rust-Proof Alloy | ✗ Rusts if Scratched |
| Installation | ✓ 100% Bolt-On | Usually Bolt-On |
| Engineering | ✓ Deep Stamped Ribs | Flat Plate Only |
| Fasteners | ✓ Recessed/Concealed | Exposed Bolt Heads |
Precision fit for the North American 6th Generation Ranger. Fits the following configurations:
2024-2026 Ford Ranger (All Trims) 2024-2026 Ford Ranger FX4 PackageExclusions: This plate is specifically for the Non-Raptor Ranger. It will not fit Ranger Raptor chassis configurations due to fuel tank size and mounting differences.
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
No. Aluminum has natural corrosion-resistant properties. Even if you scratch the metallic silver finish on rocks, the underlying aluminum will not rust or deteriorate.
No. The RIVAL Gas Tank Skid Plate is a 100% bolt-on system. It utilizes existing mounting points on the Ford Ranger chassis for a clean, non-permanent installation.
No, this specific model is for the standard Ford Ranger (including FX4). The Raptor has a different fuel tank configuration and requires a Raptor-specific RIVAL skid plate.
Ground clearance loss is negligible. RIVAL skid plates are designed to be low-profile and fit tightly against the fuel tank to preserve your Ranger's breakover angle.
The total weight is approximately 26 lbs. This lightweight design helps maintain your truck's payload capacity compared to heavy steel alternatives.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
