Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Deep-Stamped 1/4" Aluminum Armor. 30% Lighter Than Steel. 100% Corrosion Resistant.
Heavy-Duty Protection for Your AWD DrivetrainThe RIVAL 4X4 Aluminum Transmission Skid Plate is engineered to provide bulletproof underbody security for the 2023-2025 Ford Sprinter AWD. While the AWD Sprinter is a powerhouse for overlanding, its transmission is a vulnerable, expensive component that sits dangerously close to trail obstacles.
Crafted from 1/4-inch (6mm) deep-stamped aluminum, this skid plate offers a high strength-to-weight ratio that steel simply cannot match. It provides a smooth sliding surface for rocks and logs, ensuring you don't get hung up or suffer a catastrophic failure miles from the nearest service station.
The Problem & The Solution:The Pain: A single stray rock or hidden stump can puncture a transmission case, leading to a $5,000+ repair bill and a ruined expedition. Heavy steel plates protect well but lead to sagging suspensions and decreased fuel economy.
The RIVAL Solution: Deep-stamped aluminum that is 30% lighter than steel, marine-grade corrosion resistance, and a No-Drill installation that uses your vehicle's existing factory mounting points.
Key Features: RIVAL Underbody Armor
Unlike flat-cut plates, RIVAL plates are deep-stamped with reinforcing ribs, providing maximum impact resistance without adding unnecessary bulk.
Marine-grade aluminum saves significantly on weight compared to traditional steel, preserving your payload capacity and MPG.
Mounting hardware is recessed to prevent bolt-head shearing when sliding over obstacles, ensuring the plate stays securely attached.
A dual-layer protection system using a Zinc primer and Matte Metallic Silver powder coat prevents oxidation even in salt-heavy environments.
Engineered for a perfect fit, this plate bolts directly to existing factory mounting ports. No drilling or cutting required.
Integrated slots allow for water and dirt drainage, while airflow vents ensure your transmission remains at optimal operating temperatures.
Designed with serviceability in mind, featuring access ports where necessary to allow for vehicle maintenance without removing the plate.
Includes a complete fitting kit with high-strength brackets and fasteners designed to withstand extreme off-road vibrations.
Over-Engineered ArmorRIVAL 4x4 plates undergo rigorous testing in the world's most demanding terrains. The deep-stamping process not only adds a sleek aesthetic but structurally reinforces the 1/4" aluminum alloy to deflect impacts that would crush standard flat plates.
1/4" Aluminum thickness 30% Lighter than steel Zinc Primer Coated No-Drill Bolt-on Fit"The AWD Sprinter has a lot of tech under the belly that I didn't feel comfortable leaving exposed. Install was incredibly easy—literally just bolted it up to existing holes. I've already taken a few hard hits on some forest service roads, and the plate barely has a scratch. The weight savings are a huge bonus for my van build."
- Greg J., Sprinter Overlander*Repair costs are estimates. Does not include lost adventure time or vehicle downtime.
| Feature | RIVAL Aluminum Armor | Standard Steel Plates |
|---|---|---|
| Weight | ✓ 30% Lighter | ✗ Heavy (Impacts Payload) |
| Corrosion | ✓ Rust-Proof Aluminum | ✗ Prone to Rusting |
| Installation | ✓ 100% No-Drill | Often requires modification |
| Hardware | ✓ Recessed (Concealed) | Exposed Bolt Heads |
| Airflow | ✓ Integrated Venting | ✗ Often Trap Heat |
Specifically contoured for the AWD drivetrain of the Ford Sprinter. Fits the following models:
2023 Ford Sprinter AWD 2024 Ford Sprinter AWD 2025 Ford Sprinter AWDInstaller Tip: It is good practice to use a tap on all included hardware and bracketry to ensure ease of final assembly.
RIVAL skid plates are designed with airflow slots and vent apertures. These allow for continuous air circulation, ensuring that your transmission remains cool even during low-speed, high-torque off-road driving.
While steel is harder, RIVAL uses 1/4" thick aluminum with deep-stamped reinforcing ribs. This thickness and design provide comparable protection for overlanding use while being 30% lighter and naturally corrosion-resistant.
This specific transmission skid plate is designed with convenience in mind. Depending on your service technician's tools, most routine maintenance can be performed through built-in ports, though it is easily removed thanks to the bolt-on design if full access is needed.
Yes. The "No-Drill" installation makes this a great DIY project. It uses factory mounting points and includes all hardware. Basic hand tools and a jack are usually sufficient for installation.
Unlike steel, which will begin to rust as soon as it is scratched, aluminum is naturally corrosion-resistant. Even if you gouge the plate on a rock, it will not oxidize or compromise the structural integrity of the armor.
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
