RIVAL 4X4 Aluminum Radiator Skid Plate & Recovery Points Package - 2024+ Ford Ranger Raptor / FX4
Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Crafted from 1/4-inch aluminum, providing high-strength protection at just 10 lbs compared to the bulky 20 lb factory steel plate.
Includes dual CNC-machined front recovery points with a massive 11,000 lb working load limit for dependable trail extractions.
Designed as a 100% bolt-on solution that uses existing factory mounting points, ensuring a quick, clean, and professional installation.
Features deep-stamped ribs for impact resistance, plus integrated ports for water drainage and service-friendly oil access.
Ultra-Lightweight 1/4" Aluminum. 11,000 lb Rated Recovery Points. Improved Approach Angle.
Maximum Protection, Minimum WeightThe RIVAL 4X4 Radiator Skid Plate & Recovery Points Package for the 2024-Present Ford Ranger Raptor and FX4 is the ultimate front-end upgrade. By replacing the heavy factory steel plate with 1/4-inch deep-stamped aluminum, you shed 50% of the weight while gaining superior impact resistance.
This package doesn't just protect; it performs. The redesigned geometry improves your approach angle, allowing you to crawl over obstacles that would snag the factory setup. Paired with CNC-machined 11,000 lb rated recovery points, you’re ready for the most rigorous trail conditions.
The Problem & The Solution:The Pain: Factory steel skids are heavy, prone to rust, and offer mediocre approach angles. Standard recovery points can be difficult to access or under-rated for heavy pulls.
The RIVAL Solution: A 10lb lightweight aluminum shield that never rusts, provides increased ground clearance, and adds heavy-duty 11k lb recovery points for total peace of mind.
Key Features: Total Underbody Armor
The stamped design sits tighter to the chassis, providing better clearance for steep climbs and rocky descents.
Deep-stamped ribs provide maximum structural stiffness to resist bending during high-centered impacts.
Bolt heads are recessed to prevent them from being sheared off or damaged when sliding over rocks.
Integrated apertures for water and dirt drainage, plus vent slots to maintain factory-spec radiator airflow.
Tested in the OutbackRIVAL 4x4 armor is built to endure. The radiator is the most vulnerable component of your cooling system; a single stray branch or rock can end your trip. This 1/4" aluminum plate acts as an impenetrable shield for your 2024+ Ranger Raptor or FX4.
1/4 Inch Aluminum Thickness 11,000 lbs Recovery Capacity 10 lbs Total Weight Matte Silver Powder Coat
"Installed this on my '24 Raptor before a trip to Moab. The weight difference from the stock steel plate is noticeable, and the recovery points are beefy. Had to use them once to pull a buddy out of a wash, and they didn't even flinch. The silver finish looks incredible against the Ford trim."
- Jake M., Ranger Raptor Owner*Repair costs are estimates based on OEM parts and labor. Does not include lost adventure time.
Fitment: 2024-2026 Ford RangerEngineered specifically for the high-performance variants of the next-gen Ranger. This package fits:
2024+ Ford Ranger Raptor 2024+ Ford Ranger FX4Note: It is good practice to use a tap on all included hardware and bracketry during assembly to ensure the ease of final assembly.
No. Unlike the factory steel plate, RIVAL skids are made from a marine-grade aluminum alloy. Aluminum forms its own protective oxide layer, meaning it will never rust or structurally fail due to corrosion, even in salt-heavy environments.
Not at all. The RIVAL skid plate features precision-cut vent and airflow slots designed to match factory specs, ensuring your radiator and intercooler receive the necessary air volume even in high-load situations.
Yes. These CNC-machined recovery points are rated for an 11,000 lb working load limit. They are specifically designed to withstand the sudden kinetic forces of a snatch strap or the steady tension of a winch pull.
Yes. RIVAL designs their skid plates with convenient service ports. This allows you or your mechanic to access the oil drain plug and filter without having to remove the entire underbody protection system.
Actually, you gain clearance! Because the 1/4" aluminum is deep-stamped, it profile-hugs the radiator area more efficiently than the bulky factory steel. This results in a better approach angle and slightly more ground clearance than stock.
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
Questions? Give us a call today. (409) 916-8280
I'm happy with my new racks, it's perfect for that I want.
We are very happy the rack fits the painted roof of our ‘25 Bronco Heritage. Leitner right now might be the only company that makes a rack that fits the painted roof. Typical great Leitner attention to detail
We are very happy the rack fits the painted roof of our ‘25 Bronco Heritage. Leitner right now might be the only company that makes a rack that fits the painted roof. Typical great Leitner attention to detail.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I’ve had the full-length rack on my Grenadier for about a year, and it has performed flawlessly. Not only is the design simple and aesthetically pleasing, it is highly practical for carrying any load. I consistently have over 400 lbs mounted on my rack at all times, and even through multiple trips through the washboards of Death Valley at 45 mph, the rack has remained steady and strong, with not one fastener coming loose. I’d buy this rack ten times before I’d consider another brand.
Limited space in bed. Now all my gear sits in the rack above. Made all the difference in what I can fit in this truck!!
needed something low profile but strong. This platform hit it out of the park. Put it on my ARE topper and couldn’t be happier! Assembly instructions could be clearer in showing top versus bottom, but got it together easy enough. Need to show the need for squaring up before mounting. Overall break pleased