Skip to content
Trusted Gear for Serious Off-Roaders!
Trusted Gear for Serious Off-Roaders!

RCI Offroad Transmission Skid Plate | 2021+ Bronco 2.3L / 2.7L & 2024+ Ranger

SKU BRONCO-21-TRANS-NOX-STBK
Save $45.00
Original Price $449.00
Current Price $404.00

  Free Shipping

  Price Match Guarantee

  Safe/Secure Checkout

  Questions? Chat or Call us: (409) 916-8280

Notify me when back in stock

⚖️

Custom Material Choice

Select between 3/16" heavy-duty steel for maximum impact abuse or 1/4" 5052 aluminum for a lightweight, rust-proof solution weighing only 18 lbs.

🛠️

Direct Bolt-On Install

Engineered for a 100% no-drill installation, attaching securely to factory mounting points using basic hand tools for a perfect, rigid fit.

🛡️

Trans & Exhaust Shield

Provides comprehensive coverage for both the transmission and vulnerable exhaust components, shielding them from costly on and off-road hazards.

🏔️

Smooth Sliding Profile

Features a flat, low-profile surface designed to eliminate catch points, allowing your Bronco or Ranger to glide effortlessly over trail obstacles.

Description

RCI Offroad Transmission Skid Plate | 21-Present Bronco & 24+ Ranger

Heavy-Duty Transmission & Exhaust Protection. Steel or Aluminum. 100% Bolt-On.

The Ultimate Shield for Your Drivetrain

Protect your investment with the RCI Metalworks Transmission Skid Plate. Whether you’re navigating tight rock gardens or heading out on a mild camping trip, the transmission and exhaust systems on the 6th Gen Bronco and 2024+ Ranger are notoriously vulnerable to trail debris and jagged obstacles.

Precision-engineered in Fort Collins, Colorado, this armor fills the gap between your engine and transfer case skids, creating a smooth continuous belly pan. It is designed to "Carry Your World" through the toughest terrain without the risk of an expensive transmission failure.

The Problem & The Solution:

The Pain: Factory "protection" is often nonexistent or made of thin, stamped metal that buckles under the weight of the vehicle. One misplaced rock can puncture your transmission pan, leaving you stranded with a $5,000+ repair bill.
The RCI Solution: Choose between 3/16" Steel for maximum impact resistance or 1/4" Aluminum for a lightweight, rust-proof barrier. Both use a 100% bolt-on design to factory mounting points.

RCI Offroad Transmission Skid Plate installed on 21+ Bronco
Key Features: RCI Transmission Armor

American-Made Precision

CNC laser-cut and brake-formed in the USA to ensure premium quality, exact fitment, and a high-end finish.

System Compatibility

Ties in seamlessly with RCI Front and Transfer Case skids. Also compatible with most OEM skid plate setups.

Tough Finish Options

Steel options include a heavy-duty textured black powder coat for ultimate rust and corrosion resistance.

Hardware Kit Included

Comes with a complete high-grade hardware kit and instructions for an installation that takes minutes with basic tools.

Over-Engineered in the USA

We don't cut corners. Whether you have the 2.3L Bronco (no crossmember) or the 2.7L/Ranger (with crossmember), we have a specific fitment to ensure no loss in ground clearance. Our 3/16" steel is significantly tougher than OEM, providing years of reliable use and great looks.

18 - 35 lbs Lightweight Option 3/16" - 1/4" Heavy Duty Plate 100% Bolt-On Fit USA Manufactured
RCI Black Steel Transmission Skid Close Up

Real Owner Feedback ★★★★★

"The peace of mind this skid plate provides is worth every cent. I went with the aluminum to save weight on my Bronco 2.7L. The fitment was perfect and it bolted right up to the existing crossmember holes. Sliding over a high-center rock in Moab last month without a scratch on the trans pan proved its worth immediately."

- Mark S., Bronco Owner & Trail Enthusiast

Investment vs. Repair Cost Reality Check

$5,500+ Transmission Replacement $1,200+ Exhaust & Cat Repair $800+ Trail Recovery & Towing One-Time RCI Armor Investment

*Repair costs are estimates based on dealer labor. Does not include lost adventure time.

Why Choose RCI Offroad?

Feature RCI Transmission Skid Factory / Generic
Installation ✓ 100% Bolt-On (No Drill) ✗ Often Requires Mods
Material Strength ✓ 3/16" Steel / 1/4" Aluminum ✗ Flimsy Stamped Metal
Coverage ✓ Full Trans & Exhaust Shield ✗ Partial Coverage Only
Ground Clearance ✓ Smooth, High-Clearance Profile Bulky / Exposed Edges
Origin ✓ Made in USA Imported
Fitment: Bronco & Ranger

Designed specifically for the Ford drivetrain architecture. Fits the following configurations:

Bronco 2.3L: Models without frame crossmembers. Bronco 2.7L & Ranger 24+: Models with frame crossmembers.

Important Note: Not compatible with Raptor models. Trucks with electronic sway bar disconnect or lift relocation brackets may require additional spacers for clearance.

RCI Transmission Skid Side Profile

Complete Protection Package Includes:

Main Transmission Skid
Steel or Aluminum choice
Full Mounting Hardware
Zinc-plated fasteners included
Instructions & Fitment Guide
Detailed step-by-step install
American Craftsmanship
Built to last in the USA

CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Frequently Asked Questions

+ Should I choose Steel or Aluminum?

Choose 3/16" Steel if you plan on dedicated rock crawling where repeated heavy impacts are likely. Choose 1/4" Aluminum if you prioritize weight savings, fuel economy, and rust resistance for overlanding and daily driving. Aluminum is 50% lighter but still stronger than OEM.

+ Do I need to drill any holes for installation?

No. RCI transmission skids are 100% bolt-on. They utilize the existing factory attachment points on your Bronco or Ranger frame.

+ Is this skid compatible with my aftermarket lift?

Generally, yes. However, trucks with electronic sway bar disconnects and aftermarket sway bar relocation brackets may require spacers to ensure the skid doesn't interfere with the suspension components.

+ How do I know if I have frame crossmembers?

Typically, Bronco 2.7L models and the 24+ Ranger come with the required crossmembers. Bronco 2.3L models usually do not. Please check the area behind your engine skid plate for a secondary frame support beam before ordering.

+ Will this rust in snowy climates?

If you live in a salt-heavy area, the Aluminum option is highly recommended as it cannot rust. The Steel option features a high-quality powder coat, but any deep scratches from rocks should be touched up with paint to prevent surface oxidation over time.

Prop 65

California Residents

Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov

Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.

The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov

Why Buy From Us

We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.

RCI Offroad Transmission Skid Plate | 2021+ Bronco 2.3L / 2.7L & 2024+ Ranger

Reviews

Free shipping USA

All orders are shipping within 1-2 business days.

Shipping Policy

30 day easy returns

Don't need it anymore? Send it back.

Return & Refund Policy

price match

Find a better price? We'll beat it.

Price Match Guarantee

Excellent Customer Service

Questions? Give us a call today. (409) 916-8280