Extang Trifecta ALX 2015-2020 Ford F150 8ft Bed Tonneau Cover

• Pebble-grained Ancona fabric construction
• Heavy-duty aluminum frame
• Rotary knob makes for a simple one-handed operation
• Automatic latch system engages whenever the cover is closed
• Easy to install with basic hand tools
• Fold cover open for 2/3 bed access
• Includes buckle straps to secure the cover open while driving
• Easy tool-free removal when full bed access is required
• Lifetime warranty

•  2015-2020 Ford F-150

The Extang Trifecta ALX Tonneau Cover carries a limited lifetime warranty against defective materials or workmanship on all truck bed cover rails, aluminum components, clamps, bows, hardware, and vinyl covering.

WARRANTY CONDITIONS

This warranty provides coverage against defective materials or workmanship. The warranty is void if the product has been damaged by accident, unreasonable or improper use, neglect, improper service/installation/removal, modifications, acts of God, normal wear and tear or other causes not arising out of defective materials or workmanship. Interference of this product with other installed accessories or trailers is not covered under this warranty. Consequential and incidental damages are not covered under this warranty.

THE FOLLOWING CONDITIONS WILL VOID THE WARRANTY

• Wind whip damage - Tarps must be secured at all points when the vehicle is in motion. An unsecured tarp will flap, resulting in damage to the fabric.
• Improper cleaning - It is recommended to use the tested and approved Extang Tonno Tonic or clean with soap and water only. Do not use vinyl conditioners that contain silicone (i.e. Armor All) because they will dry out and crack the vinyl over time.
• Overloading of cargo - Cargo should not touch the tonneau at any point. Protrusions in the tarp will stress the fabric. Cargo may shift while traveling and cause it to push against the fabric or panels and damage it.
• Driving with panels open or improperly secured on all folding tonneaus - Prior to vehicle operation, clamps must be tightly secured so that clamp lips tightly grip the inner bedside metal surface. Open position: Tonneau must be completely folded and secured with BOTH buckles. Closed position: Tonneau must be completely flat and secured at all 4 clamps.
• Opening panels without removal of debris on all folding tonneaus - Top of tonneau MUST be free of foreign material including snow and ice before opening panels or severe damage may result.
• Towing - Do NOT tow your vehicle from the rear with any Extang tonneau cover on your truck.

All warranty decisions that result in a request to return your product will provide you with a return authorization number which must be written on the outside of the package. Shipment of the product to Extang is at the customer's expense and should only be done so after receiving a return authorization number.

PERFORMANCE

The warranty applies to the original consumer/purchaser. Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) is required for the warranty to be effective. Warranty coverage starts from the date of purchase.

Provided all warranty conditions are met, Extang will either repair or replace (at Extang's option) the product or component. Extang may require the original item to be returned postage prepaid for final determination. Extang reserves the right to substitute and offer the respective warranty discount on an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. A return authorization number must be obtained from our customer service department prior to returning any product. Shipping charges will apply for any repair or replacement. This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state.

All warranty decisions that result in a request to return your product will provide you with a return authorization number which must be written on the outside of the package. Shipment of the product to Extang is at the customer's expense and should only be done so after you have received a return authorization number.