Backwoods Adventure Mods 2013+ Ram Promaster DRIFTR Ladder

Backwoods Adventure Mods 2013+ Ram Promaster DRIFTR Ladder

Our new RAM Promaster ladder is designed with your convenience and comfort in mind, providing seamless access to your rooftop. Ladder bolts directly to the DRIFTR series roof rack, ensuring stability and safety.

Enhanced Traction

We understand that outdoor adventures often take you to muddy or wet terrains. That's why we've incorporated special notches on the end of each step, providing you with extra traction and stability. Even in challenging conditions, you can rely on our ladder to keep you secure and surefooted.

Unparalleled Comfort

Our ladder boasts steps that are deeper and flatter, offering a level of comfort that sets it apart. You can confidently ascend and descend the ladder barefoot, without any discomfort.

Compatible With 2013-2024 Ram Promaster vans in the 159 and 159 EXT lengths.

***THIS PRODUCT IS MADE FOR OFFROAD USE ONLY***

Loosely assemble the entire ladder. Pick a good spot where you would like to place the ladder. Make sure the ladder is on the side of the van without the sliding door. Using a friend, hold up the entire ladder and mock it up. Stand far away from the van to see what looks most aesthetically pleasing and mark the holes both at the top of the ladder onto the side of the roof rack and mark the holes underneath the van on the pinch weld.

These markings will be where the ladder mounts, so make sure your ladder is straight and aligned properly. After you've verified and marked where the ladder is going to be mounted, drill into the side of the DRIFTR rack and into the pinch weld at the bottom of the van. Install and fasten bolts on the top and bottom of the ladder, then push the middle ladder in or out to set the distance from the van to the ladder and tighten the 4 bolts per side of the ladder. Double check all bolts are tight, and you're good!

LIFETIME WARRANTY

We are proud to offer a lifetime warranty on the structure of each product to the original purchaser of the product. This applies to:

• Defects in material and craftsmanship, which impair the use of the product for which it is intended
• Conditions of normal and proper use

The warranty does NOT apply to defects caused by or due to:

• Improper installation, alteration, abuse, neglect, accident, corrosion, and normal wear and tear

The warranty covers repair or replacement of the product, at our discretion, and only after receiving the product for inspection. The warranty does not  cover freight charges, labor cost, installation cost, incidental or consequential damages, or cost due to down time of the vehicle. 

POWDER COAT WARRANTY

Due to normal wear and tear, and exposure to natural elements, we offer a 60-day warranty against defects in the powder coat. This includes reasonable sized gouges or scratches. Just like any other part of your vehicle, if you live in a climate that salts highways, make sure to spray down your components to prevent corrosion.

For small touch up applications, we've found that the Krylon Fusion Textured Black Spray Paint is an almost perfect match to our powder coat. For small scratches, we recommend this paint.

Please note: Any products returned for warranty consideration must be accompanied by a written description of the damage and how it happened, along with a copy of the original invoice at the time of purchase. Products are then inspected and must meet the warranty guidelines stated online for credit to be issued. If approved, Backwoods Adventure Mods will have a reasonable amount of time to remedy the defect and will repair or replace the product at no additional charge. 

RESTOCKING FEE

All products are subject to a 30% restocking fee. We will not accept returns 30 days after the customer has received the product. All products are subject to an inspection upon return.