Asfir 4x4 Toyota Tundra / Sequoia Transmission Skid Plate | 2007-2022
Free Shipping. Ships in 1-3 Business Days
Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Free Shipping. Ships in 1-3 Business Days
Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
At just 15 lbs, this 1/4-inch aluminum plate protects your transmission without the heavy fuel-economy penalty or performance lag of steel.
Engineered for a direct, no-drill installation that utilizes existing factory mounting points, ensuring your vehicle's frame remains untouched.
Built-in stiffening ribs provide maximum impact resistance, while integrated ventilation slots maintain critical transmission cooling airflow.
Marine-grade aluminum construction naturally resists corrosion, paired with zinc-coated hardware for a lifetime of protection in any climate.
Ultra-Lightweight 1/4" Aluminum Protection. 100% Bolt-On. Trail-Proven.
Bulletproof Defense for Your DrivetrainThe Asfir 4x4 Transmission Skid Plate is a vital insurance policy for your Toyota Tundra or Sequoia. Your transmission is one of the most expensive and vulnerable components under your truck. This precision-engineered shield is laser-cut from 1/4" (6mm) high-grade aluminum, offering the perfect balance of rugged protection and weight efficiency.
Asfir armor is built to survive the harshest desert environments. This plate ensures that when you're navigating rocky trails or hidden stumps, your transmission remains untouched while maintaining a smooth underbody surface to slide over obstacles.
The Problem & The Solution:The Pain: The Tundra/Sequoia transmission pan sits low and is unprotected from the factory. A single sharp rock can puncture the pan, leading to total transmission failure and a multi-thousand dollar repair bill.
The Asfir Solution: We provide a 15 lb high-strength shield that installs with Zero Drilling. It’s reinforced with stiffening ribs to prevent flexing and features ventilation to keep your transmission fluid at optimal temperatures.
Designed for a 100% bolt-on installation using factory mounting points. No permanent vehicle modifications required.
At only 15 lbs, this plate provides heavy-duty protection without dragging down your performance or fuel economy.
Engineered with pressed structural ribs to increase rigidity, ensuring the plate won't buckle under high-impact loads.
Integrated ventilation slots ensure your transmission stays cool under load while allowing mud and water to drain freely.
Hugs the drivetrain components tightly to minimize the loss of ground clearance, keeping your truck agile off-road.
Includes heavy-duty steel brackets with a multi-layer zinc coating to prevent rust and hardware seizure.
High-grade aluminum construction naturally resists rust, making it perfect for salty roads or coastal environments.
Laser-cut specifically for the Toyota Tundra (07-21) and Sequoia (08-22) chassis for a rattle-free, perfect fit.
Engineered for Extreme ReliabilityWe don't believe in universal fitment. The Asfir Transmission plate features 6mm multi-wall aluminum thickness in critical areas and is held together by high-grade fasteners. It is part of a modular system that connects seamlessly with Asfir's front and transfer case skid plates.
15 lbs Total Weight 6mm Aerospace Aluminum 5.7L V8 Engine Fitment Bolt-On Installation"I bought the transmission and transfer case plates for my 2015 Tundra. The quality of the aluminum is top-notch—clean welds and precise cuts. The 15 lb weight is nothing compared to steel plates, so I didn't lose any MPG. I hit a submerged stump last weekend that would have definitely crushed my transmission pan, but the Asfir plate just slid right over. No-drill install was a breeze."
- Greg M., Tundra Owner Maintenance NoteService Access: While this plate is designed for maximum coverage, it can be easily removed for transmission servicing. We recommend checking bolt torque after every oil change to ensure the hardware remains secure after off-road vibration.
| Feature | Asfir Aluminum | OEM / Generic Plates |
|---|---|---|
| Installation | ✓ 100% Bolt-On (No Drill) | ✗ Often Requires Drilling |
| Weight | ✓ Ultra-Light (15 lbs) | ✗ Heavy (30-45 lbs) |
| Rust Resistance | ✓ Marine-Grade Aluminum | ✗ Prone to Rust (Steel) |
| Cooling | ✓ Integrated Venting | ✗ Solid (Traps Heat) |
| Origin | ✓ Made in Israel | Imported Mass-Market |
Designed specifically for the chassis curvature of the full-size Toyota platform. Fits the following models:
2007 - 2021 Toyota Tundra (5.7L) 2008 - 2022 Toyota Sequoia (5.7L)Complete the Protection: This plate is a core component of the ASFIR complete underbody kit, protecting the transmission gap between the engine and the transfer case.
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
No. The Asfir Transmission Skid Plate is designed with precision-placed ventilation slots that allow for continuous airflow over the transmission pan, maintaining factory-spec cooling even under heavy off-road use.
Absolutely not. This plate is a 100% bolt-on assembly. It uses existing threaded holes and mounting points on your Toyota's frame, ensuring your warranty and resale value remain intact.
While designed to work perfectly with the Asfir full underbody kit, this transmission plate can often be used alongside other brands. However, we cannot guarantee overlap fitment with non-Asfir front or transfer case plates without minor modification.
Our 6mm (1/4") aluminum is roughly 30% lighter than 3/16" steel while offering excellent impact resistance. Aluminum also has a "slicker" surface for sliding over rocks and will never rust, even if the powder coat is scratched.
Yes, this skid plate is designed to fit the chassis of both 2WD and 4WD Toyota Tundra and Sequoia models equipped with the 5.7L engine.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
I love my trailhead roof top tent so much. It is so warm and spacious. Itās very simple to setup and put away. Extremely happy with my purchase. I waited to write a review till I used it multiple times so I could tell if I really liked it or not. Thereās not a thing I would want to change.
Give my jeep a solid sturdy look. Installation was ok if you follow the instructions properly.
Definitely a good product. Its super easy to install with instructions. It opens up nicely and shade coverage is good.
We have been on multiple trips with this tent. Its stable and comfortable with a good space for 2+ person to sleep in. Easy to setup and can be taken down under 10 minutes. The tent is waterproof and windproof and can be used during the winter season. Its worth the money and we are overall satisfied with our tent.
Material is of good quality. Easy to set up and teardown.
Looks great and very easy to install. Fits perfectly with no cutting on my Colorado 5 1/2 ft bed. As I unfolded the cover for the first time and each panel locked in place perfectly, I thought, Wow, that was easy.
Questions? Give us a call today. (409) 916-8280