Free Shipping
Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Heavy-Duty 5/32" Steel Protection. 4-Piece Kit. 100% Bolt-On Shield.
Bulletproof Your 4Runner’s SuspensionUpgrade your Toyota 4Runner’s off-road protection with ASFIR’s heavy-duty steel skid plates. Specifically designed for the 6th Gen 4Runner, this comprehensive 4-piece kit shields vulnerable radius arms and suspension components from rocks, jagged debris, and heavy trail impacts.
Engineered to ensure long-lasting durability in the toughest terrain, these plates provide the peace of mind needed to tackle technical trails without fearing expensive underbody damage. Proudly made in Israel, ASFIR armor is the gold standard for global off-road enthusiasts.
The Problem & The Solution:The Pain: Modern suspension components like radius arms are highly exposed. A single direct hit from a rock can bend these parts, leading to alignment failure or a stranded vehicle.
The ASFIR Solution: Our 5/32" (4mm) High-Strength Steel kit creates a rigid barrier, absorbing impacts and allowing your 4Runner to slide over obstacles safely.
Key Features: ASFIR Steel Armor Kit
Constructed from high-strength steel for ultimate impact resistance against the harshest trail obstacles.
A complete kit designed specifically to safeguard the radius arms and critical transmission zones.
Quick 100% bolt-on fitment. No drilling, cutting, or welding required, keeping your 4Runner's frame intact.
Strategically reinforced in high-stress impact areas to prevent deformation under heavy loads.
Mounted with zinc-coated steel brackets to ensure maximum corrosion resistance in wet or salty conditions.
Integrated drainage holes and ventilation slots allow mud, water, and debris to escape easily.
At just 11 lbs, this kit provides elite protection without adding excessive weight to your suspension.
Includes all required hardware for a fast and easy setup right in your driveway.
Tailored for the Next Gen 4RunnerPrecision-crafted for the 2.4L Gas engine 4Runner, these plates maintain maximum ground clearance while adding essential durability. The slim profile ensures that your off-road geometry remains optimized while your hardware stays protected.
11 lb Ultra Light 4mm Steel Thickness 4 Piece Armor Kit Zinc Bracket Coating
"The radius arms on the 2025 4Runner look like a target for every rock on the trail. I installed the ASFIR kit in under 30 minutes. The fit is incredibly tight to the body, and you can tell the steel is high quality. Took a decent scrape last weekend and the plate barely showed a mark—worth every penny."
- Jason M., 6th Gen 4Runner Owner Fitment & Compatibility NotePlease Note: This kit is designed specifically for Gas engine models. While some database tables may list Hybrid compatibility, manufacturer notes indicate it is not compatible with Hybrid models due to underbody configuration differences.
| Feature | ASFIR Steel Armor | OEM / Generic Plates |
|---|---|---|
| Material | ✓ 5/32" High-Strength Steel | ✗ Thin Plastic or Stamped Metal |
| Installation | ✓ 100% Bolt-On | Varies |
| Durability | ✓ Reinforced Stress Zones | ✗ Easily Dented/Cracked |
| Corrosion Protection | ✓ Zinc-Coated Brackets | Standard Paint |
| Maintenance | ✓ Built-in Mud/Water Drains | ✗ Traps Mud & Moisture |
Engineered for the 2025-2026 Toyota 4Runner (2.4L Automatic). Fits the following configurations:
2025 - 2026 Toyota 4Runner (GAS 2.4L) 2025 - 2026 Toyota 4Runner (FHEV 2.4L)**Verify underbody clearance for FHEV models before installation as configurations may vary by trim.
Kit Includes: 4-piece protection set, zinc-coated brackets, and all necessary mounting hardware.
Radius arms and suspension mounts are high-impact zones. Steel offers superior "sliding" capabilities over rocks and higher resistance to gouging compared to aluminum, which is essential for these specific components.
No. The ASFIR plates mount to the chassis and shield the radius arms without interfering with the suspension's movement or alignment settings. In fact, they protect your alignment by preventing the arms from being bent by obstacles.
Not at all. This is a 100% bolt-on kit. Most owners can complete the installation in under 45 minutes using standard hand tools. No specialized mechanical knowledge or welding is required.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
