Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
6mm Aluminum Defense. Engineered for Badlands & First Edition. No-Drill Installation.
Maximum Protection for High-Performance TrimsThe Asfir 4x4 Ford Bronco Transmission Skid Plate is the definitive armor solution for owners of the Badlands, First Edition, and Heritage Limited models. Manufactured from premium 1/4" (6 mm) laser-cut aluminum, this plate is specifically designed to accommodate the unique geometry of the Stabilizer Bar (Sway Bar) Disconnect system.
This skid plate shields both your transmission and transfer case from trail hazards while adding only 11 lbs to your build. It ensures that your high-performance suspension components are protected without compromising ground clearance or adding the excessive weight of traditional steel plates.
Why ASFIR Protection:The Pain: The complex Stabilizer Bar Disconnect assembly on premium Bronco trims makes standard transmission plates difficult to fit, often leaving the drivetrain vulnerable to rock strikes that cause massive repair bills.
The Asfir Solution: We've engineered a trim-specific 6mm aluminum shield with reinforced ribs and a 100% bolt-on design. It integrates perfectly with your factory equipment, providing "Real Off-Road Protection" for your most critical components.
Key Features: Heavy-Duty Drivetrain Armor
Built from 6mm high-grade aluminum for an elite strength-to-weight ratio. Tough enough for rocks, light enough for your suspension.
Specifically engineered for Bronco models with the factory disconnecting sway bar, ensuring a precise, interference-free fit.
100% bolt-on assembly. Uses existing factory mounting points, meaning no permanent modifications and preserved resale value.
Integrated stiffening ribs provide additional rigidity in high-stress zones, preventing the plate from bending under heavy impact.
Mounting hardware features zinc-coated steel brackets for maximum corrosion resistance in wet or salty off-road environments.
Laser-cut air vents reduce heat build-up around the transmission and transfer case during low-speed rock crawling.
Strategically placed drain holes allow water, mud, and sand to escape easily, simplifying your post-adventure cleaning.
At only 11 lbs, this skid plate provides heavy-duty defense without overloading your suspension or affecting fuel economy.
Durable Off-Road ReliabilityDon't let a hidden stump end your trip. The Asfir Transmission Skid Plate acts as a shield for your drivetrain's cast aluminum housing. By utilizing 6mm aluminum, we provide the impact resistance of steel while naturally resisting rust and keeping the center of gravity low.
11 lbs Lightweight 6 mm Aluminum Thickness Bolt-On Mounting Style Israel Proudly Made In
"Finding a transmission plate that works with the Badlands sway bar disconnect was a headache until I found Asfir. The install took 30 minutes and the fit is perfect. It's light enough that I didn't need a second person to hold it up during the bolt-on process. Already took one hard hit on a trail in Utah and it barely scratched the aluminum."
- Robert M., Bronco Badlands Owner*Repair costs are estimates. Puncturing a drivetrain housing often results in an immediate loss of fluids and total failure.
| Feature | Asfir Transmission Skid | Standard Steel Skids |
|---|---|---|
| Thickness | ✓ 6mm Aluminum | 3mm - 4mm Steel |
| Weight | ✓ 11 lbs (Ultralight) | ✗ 35+ lbs (Heavy) |
| Rust Resistance | ✓ High (Will not rust) | ✗ Low (Rusts when chipped) |
| Fitment | ✓ Sway Bar Disconnect Specific | ✗ Generic/Blocked Fitment |
| Installation | ✓ 100% No-Drill | Standard |
Specifically designed for Bronco trims equipped with the Stabilizer Bar Disconnect. Compatible with:
Ford Bronco Badlands Ford Bronco First Edition Ford Bronco Heritage Limited EditionEngine Compatibility: Fits 2.3L and 2.7L EcoBoost models in both 2-door and 4-door configurations. Works with standard OEM plastic front skid plates.
AMP PowerSteps Fast Facts
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Typically, no. Those trims usually do not have the Stabilizer Bar Disconnect system. If your Bronco does not have a disconnecting sway bar, please check our listing for the "Without Stabilizer Bar Disconnect" model to ensure proper fitment.
No. Asfir has specifically engineered this plate to provide full clearance for the Stabilizer Bar Disconnect mechanism, ensuring your suspension performs exactly as intended off-road.
Yes. This transmission skid plate is designed to be compatible with the plastic OEM front skid plate. All necessary mounting hardware for this setup is included.
No. The installation is 100% bolt-on using existing factory mounting points on the Bronco's chassis. No drilling or cutting is required.
The plate features laser-cut drainage holes specifically designed to let water and debris escape. Simply pressure wash through the ventilation slots to flush out any trapped mud.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
