Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
6mm Aluminum Armor. 13 lb Lightweight Design. No-Drill Chassis Mounting.
Maximum Strength for Critical ComponentsThe Asfir 4x4 Transmission Skid Plate is engineered to protect one of the most vulnerable and expensive components of your Ford Bronco or Ranger Raptor drivetrain. Manufactured from high-quality laser-cut 1/4" (6 mm) aluminum, it provides a massive upgrade in strength over factory splash guards without the heavy weight of steel plates.
Proudly made in Israel, this skid plate is designed specifically for vehicles without a stabilizer bar disconnect. It integrates seamlessly with the chassis, shielding your transmission from jagged rocks, stumps, and trail debris while preserving ground clearance for technical maneuvers.
Why ASFIR Protection:The Pain: Modern transmission cases are made of cast aluminum and are highly susceptible to cracking upon impact. A single trail mishap can lead to a fluid leak that leaves you stranded.
The Asfir Solution: Our 6mm Aluminum shield is reinforced with structural ribs and mounts via zinc-coated steel brackets. It features a 100% bolt-on design that protects your investment without permanent vehicle modification.
Key Features: Trail-Ready Transmission Protection
6mm laser-cut aluminum offers an elite strength-to-weight ratio, ensuring heavy-duty impact resistance at just 13 lbs.
Designed for a true bolt-on installation using factory chassis points. Maintains your vehicle's resale value and warranty.
Reinforced with integrated ribs to enhance rigidity in high-stress zones, preventing the plate from bending under load.
Laser-cut air vents reduce heat build-up around the transmission, ensuring optimal operating temperatures during slow crawling.
Uses corrosion-resistant zinc-coated steel brackets to provide a secure mount that stands up to road salt and moisture.
Integrated drain holes allow water, mud, and trail debris to escape easily, simplifying your post-trail washdown.
Compatible with the plastic OEM front skid plate, allowing you to build your protection system at your own pace.
The low-profile, vehicle-specific design hugs the transmission closely to ensure you don't snag on obstacles.
Engineered for the Long HaulOff-roading in a Bronco or Ranger Raptor means pushing limits. Asfir ensures your transmission can handle the pressure. By using 6mm aluminum, we deliver a shield that is "Real Off-Road Protection"—tough enough to slide over rocks but light enough to preserve your suspension's performance.
13 lbs Total Weight 6 mm Aluminum Thickness Bolt-On Install Type Israel Origin
"The installation on my Bronco Big Bend was perfectly straightforward. I wanted something that covered the transmission without adding 50 pounds of steel. The Asfir aluminum plate is thick, light, and the quality of the welds and brackets is top-tier. Essential peace of mind for the trails."
- Mark T., Ford Bronco Owner*Estimates based on OE parts and labor. Transmission damage is often a trip-ending failure.
| Feature | Asfir Transmission Skid | Generic Steel Plates |
|---|---|---|
| Material | ✓ 6mm Aluminum Alloy | ✗ Heavy Steel |
| Weight | ✓ 13 lbs (Ultralight) | ✗ 30+ lbs (Heavy) |
| Rust Resistance | ✓ High (Natural Aluminum) | ✗ Low (Rusts when chipped) |
| Hardware | ✓ Zinc-Coated Steel | Standard Fasteners |
| Installation | ✓ 100% Bolt-On | Varies (Often Drills) |
Designed for Ford platforms WITHOUT a Stabilizer Bar Disconnect. Compatible with:
Ford Bronco (2021+): Base, Big Bend, Black Diamond, Outer Banks Ford Ranger Raptor (2023+) 3.0L 2.3L & 2.7L Engines (Auto & Manual)Important: If your Bronco features a disconnecting sway bar (standard on Badlands and some Sasquatch builds), this model will not fit.
AMP PowerSteps Fast Facts
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Typically, no. Most Badlands models come equipped with the Stabilizer Bar Disconnect system. This specific skid plate is only compatible with models without the sway bar disconnect. Please check your vehicle's equipment before ordering.
Yes. This transmission skid plate is designed to be compatible with the plastic OEM front skid plate. If you need specific mounting guidance for this combination, please reach out to our team.
No. Asfir includes integrated air vents designed to maintain factory cooling specs, allowing airflow to move over the transmission housing while you drive.
Yes. Every skid plate ships with a complete assembly hardware kit, including the zinc-coated steel brackets and all necessary fasteners for a no-drill install.
At 6mm, this aluminum plate offers heavy-duty protection comparable to many steel plates but at nearly half the weight. This prevents front-end sag, maintains fuel economy, and won't rust when the trail takes its toll.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
