Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Heavy-Duty Steel Shielding. Targeted Suspension Protection. 100% Bolt-On Setup.
Reinforce Your Bronco's FoundationThe Asfir 4x4 Transmission Crossmember Protectors are a vital upgrade for Ford Bronco 2.7L and Ranger Raptor owners who push their vehicles to the limit. These precision-built shields are manufactured from high-quality laser-cut 1/8" (3.17 mm) steel, delivering a targeted defense for the transmission crossmember and rear suspension arms.
Proudly made in Israel, this protector set ensures that jagged rocks and trail debris don't snag your crossmember or damage your suspension geometry. By using a vehicle-specific design, Asfir provides high-strength defense while maintaining maximum ground clearance for technical rock crawling.
Why ASFIR Protection:The Pain: The transmission crossmember and rear arm mounts are "hang-up" points. A hard hit can bend the crossmember, leading to drivetrain misalignment or vibration that is costly to diagnose and repair.
The Asfir Solution: Our 9 lb steel protector pair features integrated stiffening ribs to handle heavy impacts. The 100% bolt-on design allows for a quick, professional installation with zero drilling or cutting required.
Key Features: Heavy-Duty Crossmember Armor
Constructed from high-grade 3.17mm steel for superior structural integrity and the ability to slide over obstacles without catching.
100% bolt-on assembly. Mounts directly to factory chassis points, preserving your vehicle’s structural warranty and resale value.
Specifically designed to guard not just the crossmember, but also the vulnerable rear suspension arm mounting points.
Integrated laser-cut ventilation slots prevent heat buildup around the transmission, maintaining optimal operating temperatures.
Reinforced with structural ribs for added rigidity, ensuring the plates don't deform under the stress of high-impact trail environments.
Strategically placed drain holes allow mud, water, and sand to escape, preventing corrosive weight build-up under the vehicle.
At only 9 lbs for the entire set, you get heavy-duty protection without adding unnecessary bulk to your suspension's load.
Ships with a complete mounting kit featuring all high-strength fasteners required for a seamless afternoon install.
Engineered for Harsh EnvironmentsYour crossmember is the backbone of your drivetrain support. Asfir’s protectors are tested in the most grueling off-road conditions to ensure your vehicle returns from the trail in one piece. Designed specifically for high-output 2.7L and 3.0L models, these plates provide the "Real Off-Road Protection" you can rely on.
9 lbs Set Weight 1/8" (3.17mm) Steel Thickness Bolt-On Install Type Israel Origin
"The crossmember on my 2.7L Bronco was a constant worry when rock crawling. These Asfir protectors were the perfect solution. They were easy to install and the fit was precise. I’ve already taken a few scrapes on them and the steel has held up perfectly—saved my crossmember from some nasty rock rash!"
- Mark T., Bronco Badlands 2.7L Owner*Repair costs are estimates. Bent crossmembers can cause permanent drivetrain vibration if not fixed correctly.
Fitment: High-Output PlatformsDesigned specifically for Ford platforms with 2.7L and 3.0L engine configurations:
Ford Bronco 2.7L EcoBoost (All Trims) — 2021+ Ford Ranger Raptor 3.0L — 2023+⚠️ FITMENT NOTE: This product is NOT compatible with 2.3L engine vehicles.
The chassis and transmission crossmember geometry on the 2.3L EcoBoost Bronco is different from the 2.7L and 3.0L models. This set is specifically engineered for the high-output drivetrain dimensions.
Yes. Every order includes the complete Left (L) and Right (R) side transmission crossmember protectors and all necessary high-strength hardware.
No. Asfir has integrated specifically placed ventilation slots into the design to ensure airflow is maintained around the crossmember and transmission during heavy off-road use.
No. These are 100% bolt-on. They utilize existing factory mounting points on the Ford Bronco and Ranger Raptor chassis architecture.
Clearance loss is minimal. The protectors are designed to hug the crossmember as closely as possible, typically adding only the 1/8" thickness of the steel armor to your vehicle's profile.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
