Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
6mm Laser-Cut Aluminum. Direct Bolt-On. Suspension-Specific Armor.
Bulletproof Defense for Your SuspensionThe Asfir 4x4 Ford Bronco Front Lower Arms Protector Skid Plates are engineered to shield one of the most vulnerable points on your chassis. Your lower control arms are the first to encounter rocks, stumps, and trail debris. Crafted from 1/4" (6 mm) laser-cut aluminum, these protectors provide a lightweight yet incredibly strong barrier against suspension-ruining impacts.
This set is designed specifically for the 6th Gen Bronco chassis. By utilizing a vehicle-specific fit, Asfir ensures maximum coverage for the front suspension arms without compromising ground clearance or articulation.
The Problem & The Solution:The Pain: A single rock strike to an unprotected lower arm can bend the metal, ruin your alignment, and potentially strand you on the trail with a non-driveable vehicle.
The Asfir Solution: Our 14 lb aluminum pair provides high-impact resistance with reinforced stiffening ribs. The 100% bolt-on design means you get professional-grade protection without drilling into your suspension components.
Key Features: Front Suspension Armor
Laser-cut 1/4" aluminum provides heavy-duty impact protection while maintaining an excellent strength-to-weight ratio.
No drilling or cutting required. Engineered to bolt directly to existing chassis points for a perfect, unmodified fit.
Integrated structural ribs increase the plate's rigidity, ensuring the protectors won't deform under high vertical loads.
Heavy-duty steel support brackets are zinc-coated for superior corrosion resistance, even in salty or wet environments.
Integrated ventilation slots and drain holes allow water, mud, and trail debris to escape, preventing weight buildup and trapped moisture.
At only 14 lbs for the pair, these protectors provide massive safety without noticeably affecting unsprung weight or fuel economy.
The low-profile design follows the contours of the Bronco's front end to maintain maximum ground clearance for rock crawling.
Every order includes both the left and right side protectors along with all necessary mounting hardware kit.
Tested in Harsh EnvironmentsAsfir 4x4 builds underbody armor that you can rely on, wherever the trail takes you. By shielding the front lower control arms, you are protecting the geometry of your suspension. These plates are a must-have for overlanders and rock crawlers who demand reliable performance in tough conditions.
14 lbs Set Weight 6 mm Thickness 2.3/2.7L Compatibility Zinc Hardware Finish
"The lower control arms on the Bronco sit pretty low. After seeing a buddy bend his on a rock at Moab, I ordered the Asfir protectors. They fit perfectly and were a simple bolt-on. They have already taken a couple of hits that would have definitely scarred the OE arms. Peace of mind is worth every penny."
- Steven J., Bronco Badlands Owner*Repair costs are estimates. Bent suspension arms are often trip-ending failures.
| Feature | Asfir 4x4 Armor | Unprotected Arms |
|---|---|---|
| Material | ✓ 6mm High-Grade Aluminum | ✗ Exposed OE Steel/Aluminum |
| Impact Resistance | ✓ Structural Stiffening Ribs | ✗ Direct Impact Vulnerability |
| Maintenance | ✓ Integrated Debris Drain Holes | Standard |
| Rust Resistance | ✓ Natural Aluminum & Zinc Brackets | ✗ Chipped paint leads to rust |
| Installation | ✓ 100% No-Drill Bolt-On | Standard |
Specifically engineered for 2-door and 4-door Bronco models (2021-current). Compatible with all engine and transmission configurations:
2.3L EcoBoost I4 2.7L EcoBoost V6 Hoss 1.0, 2.0, and 3.0 Suspension PackagesPackage Contents: Includes both Left and Right side protectors and all necessary high-strength hardware for a complete installation.
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
These skid plates are designed to fit the Original Equipment (OE) lower control arms. If your lift kit uses the factory lower arms, they will fit perfectly. If your lift kit includes complete replacement lower arms, fitment cannot be guaranteed.
No. The skid plates bolt onto the exterior of the arms and do not interfere with the pivot points or adjustment cams of your suspension. Your alignment remains unchanged after installation.
No. These are 100% bolt-on. They utilize the Bronco's existing chassis and arm architecture for a secure mount without permanent vehicle modification.
Aluminum is ideal for unsprung weight components. At 7 lbs per side, it provides 6mm of thick defense without significantly increasing the weight the suspension has to move, preserving your ride quality and shock performance.
The integrated drain holes and ventilation slots make it easy. Simply aim a pressure washer through the openings to flush out any mud, sand, or small rocks that may have accumulated during your trip.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
