Free Shipping. Ships in 1-3 Business Days
Price Match Guarantee
Safe/Secure Checkout
Questions? Chat or Call us: (409) 916-8280
Ultra-Lightweight 1/4" Aluminum Protection. Precision Fit for 2.0L Turbo Models. 100% Bolt-On.
Maximum Trail Defense Without the WeightThe Asfir 4x4 3-Piece Skid Plate Kit is specifically engineered for the Jeep Wrangler JL 2-Door (SWB) equipped with the 2.0L gasoline engine. In the world of off-roading, weight is the enemy of performance. This kit provides a complete "nose-to-tail" shield for your drivetrain using high-grade 1/4" aluminum—delivering the impact resistance of steel at a fraction of the weight.
Engineered with precision, these plates are precision laser-cut to hug the underbody of your JL, maintaining maximum ground clearance while protecting your most expensive mechanical components from jagged rocks and stump strikes.
The Problem & The Solution:The Pain: Factory "protection" on the JL is often just thin sheet metal or plastic, leaving your oil pan and transfer case vulnerable to catastrophic punctures on the trail.
The Asfir Solution: Our 6mm thick aluminum plates utilize Stiffening Ribs and Zinc-Coated Steel Brackets to absorb and distribute massive impacts without bending or rusting.
Key Features: The Asfir Armor Advantage
Unlike "universal" kits, this set is custom-clearanced for the specific plumbing and routing of the 2.0L Turbo engine and MHEV models.
Crafted from aerospace-grade aluminum that is naturally rust-resistant and light enough to prevent suspension sag.
100% bolt-on assembly. Mounts directly to factory chassis points so you never have to take a drill to your Wrangler's frame.
Pressed stiffening ribs are engineered into the aluminum to provide extra structural integrity during heavy-duty crawling.
Precision-cut slots ensure your transmission and engine maintain airflow while allowing mud and debris to drain out easily.
The plates are tucked tight to the frame, preserving your breakover angle—critical for the short wheelbase 2-door models.
Tested in the World's Toughest TerrainsAsfir 4x4 armor isn't just for show. Each plate is reinforced with structural ribs in high-stress zones. By using zinc-coated steel brackets for the mounting interface, we ensure the hardware never seizes, allowing for easy removal if maintenance is required.
66 lbs Total Weight 6mm Thickness 3 Skids Full Coverage Israel Proven Quality
"The fitment on my 2-door Rubicon was perfect. Unlike steel skids that rusted out after one winter in the Northeast, these Asfir plates still look great. I've taken several hard hits on the fuel tank plate and it didn't even flinch. If you have the 2.0L, this is the kit you want."
- Mike T., Wrangler JL Owner*Estimates based on average dealership labor and parts. Does not include towing or trail recovery fees.
| Feature | Asfir 4x4 Kit | Generic Steel Skids |
|---|---|---|
| Weight | ✓ 66 lbs (Lightweight) | ✗ 130+ lbs (Heavy) |
| Corrosion | ✓ Naturally Rust-Proof | ✗ Prone to Rusting |
| Installation | ✓ No Drilling Required | Often Requires Drilling |
| Ground Clearance | ✓ High-Tuck Design | ✗ Can decrease clearance |
Specifically clearanced for the 2-Door (Short Wheelbase) chassis with the 2.0L powertrain. Fits the following years:
2018 - current Jeep Wrangler JL (2-Door) 2.0L Gasoline Engine Mild Hybrid EV-Gas (MHEV)Complete 3-Piece Kit Includes:
• Engine & Transmission Skid Plate (547459)
• Transfer Case Skid Plate (547465)
• Fuel Tank Skid Plate (547471)
CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Because these are made from 1/4" aluminum, the entire kit only weighs 66 lbs. This is significantly lighter than steel alternatives, meaning it has a negligible effect on your fuel economy and won't cause your suspension to sag.
Yes. The Asfir Engine Skid Plate is designed with built-in drain holes and service ports to allow for routine maintenance like oil and filter changes without requiring the full removal of the armor system.
No. When installed correctly using the provided zinc-coated steel brackets and high-quality hardware, the plates are rigidly mounted to the chassis. The integrated stiffening ribs also prevent the aluminum from vibrating or "oil-canning" at highway speeds.
Yes. This specific kit (Engine Skid 547459) is designed specifically for the unique clearances and mounting locations of the 2.0L Turbo powertrain. The 3.6L models require a different engine skid plate configuration.
Our 6mm (approx 1/4") aluminum plates offer comparable impact resistance to standard off-road steel plates but provide better energy absorption. Aluminum also "slides" better over rocks and will never rust if the surface is scratched.
California Residents
Prop 65 Warning- Product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
Proposition 65 is a California law passed in 1986. Its goals are to protect drinking water sources from toxic substances that may cause cancer and birth defects and to reduce or eliminate exposures to those chemicals generally, for example in consumer products, by requiring warnings in advance of those exposures.
The regulation requires the State of California to revise and republish yearly a list of chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. The current list contains over 900 naturally occurring and synthetic chemicals. This regulation also requires manufacturers to place warnings on products that contain any of the chemicals listed by the State of California. No other states require warnings of this nature, and products with Prop 65 warning language are legal to sell in all states. Detailed information regarding requirements for compliance to the California Prop. 65 is can be found at: www.P65Warning.ca.gov
We get it. You've got a lot of choice when it comes to online retailers.
Here's why we think you should shop with us at ExtrailAuto.
The wait time was more than I anticipated even after seeing the notification of long lead times. I have to give them props for giving some compensation for the excessive wait time. Having slightly larger holes would help with fitment. Had a hard time getting the front drivers side away from the pinch weld. Eventually had to use washers to add space away from the truck. Need to update pictures and instalation video for the new sliders they are now making
All packing and shipment were great, everything was there. I had to contract out the install because of arthritis, it took them two hours and looks perfect. Zero wind noise at any speed 0 to 100.
Absolutely love my new rack and roam cases. Appreciate the Sherpa crew as well for their hospitality while the installation was taking place.
Fit and finish is excellent. Looks great on the Bronco. No whistling noise at all, some additional wind noise over 60mph but not much different than it was without the rack. Assembly was not too difficult. Instructions and videos could be a little better.
The quality and dedication of the team at Sherpa is evident from the very first interaction with them, and is further proven in the product itself. This rack is well engineered, easy to assemble, easy to adjust, and holds up incredibly well with no loosening or rattling or shifting (even after over 200 miles of driving on poorly maintained roads). Currently operating with approximately 180 pounds of gear mounted on the bed rack and no issues at all so far. I expected the vibration to work the bolts loose over time, but every time I check they're all still snug. My only regret is that I didn't pull the trigger and get this rack sooner.
First of all, the team at Sherpa is full of passion for adventure and that passion shows in the quality of their products. This roof rack looks incredible and surprised me with it's sturdiness. No loosening of hardware, even after weeks of driving. Currently holding approximately 80 pounds of gear for everyday driving, plus an additional 110 strapped on top during a camping trip (and I even stood on top of the entire loadout). No warping, bending, twisting, or slipping. The fact that this matches the bed rack perfectly in height is the icing on the cake. Easily serves as a tie off for a tarp, rain fly, hammock, or whatever you need. Perfect for modular campsite setup and quick teardown.
I bought the Sherpa Crestone rack for my 2024 4Runner TRD Pro. Incredibly well-made and excellent design. Spend the extra , to get best roof rack in the market. You won’t regret it.
This is our first roof rack that we are going to use to put a RRT (roof top tent) on for back country trips. Well-built product that came with all the nuts, bolts and washers to complete the installation. Took about 1-1/2 to 2 hours install the rack. You will another person to help place the racks on top of the Jeep for final install. Overall, a great, well-built American product
Install was super easy. The quality was great. Customer service was quick to respond to any issues! I’ve already been getting compliments on it and what brand it is. This will be great for camping this year!
This is on my tundra absolutely solid rack looks fantastic extremely modular, which is why I went this route. I can use the whole rack when traveling and over landing then rock the chase rack only when the rest is not in use, I actually use the recovery traction board mounts for my shower room set up, which works amazingly just relocated the board somewhere shown in picture keep innovating TUWAand I’ll keep purchasing.
Good looking cat shields made of stainless steel with cooling holes. Priced well, easy install, no issues. Would buy again.
Great service from their staff. Robert help me through all the process with a request I had, he responded all emails in a timely manner and provided great help.
We received it within 3 days and installed the same day. Great awning and very well made.
the tent is very nice, comfortable and roomy.
Following the instructions was fairly easy. Its better to have second person to set it up. I really like the tent and the support that from ExtrailAuto. Really recommeded! Thanks
