Lightweight & Durable | RIVAL Aluminum Engine Skid Plate for 4Runner & Lexus GX460 Are you tired of worrying about underbody damage whil...
View full detailsEquip your Toyota 4Runner with industry-leading underbody protection, ensuring confidence on every trail. Our collection of skid plates and off-road armor is precision-engineered to shield your vehicle’s vital components—transfer case, fuel tank, differential, and more—from rocks, roots, and rough terrain.
Vehicle-Specific Design
Each skid plate and armor panel is laser-cut and CNC-formed to match the 4Runner’s chassis contours for a seamless, bolt-on fit.
Heavy-Duty Materials
Crafted from 3/16″ to 1/4″ milled steel or thick aluminum, our underbody armor delivers superior impact resistance without adding excessive weight.
Comprehensive Coverage
Protect critical components including the engine sump, transfer case, fuel tank, and differentials, keeping you safe from trail hazards.
Corrosion-Resistant Finish
Powder-coated or anodized surfaces provide long-lasting rust protection, ensuring your armor stays rugged and reliable, trip after trip.
Easy Installation
Utilize existing factory mounting points for a quick bolt-on process—no drilling or fabrication required. Get on the trail faster and worry less about your build.
Whether you’re navigating sharp rock ledges, deep mud ruts, or rugged forest paths, our 4Runner skid plates and underbody armor give you the peace of mind to push boundaries. Reinforce your rig with trusted protection that stands up to the toughest off-road conditions.
Browse our 4Runner Underbody Protection collection today and armor up for your next adventure—because when the going gets tough, your 4Runner should stay one step ahead of the trail.
Save $-349.00
Lightweight & Durable | RIVAL Aluminum Engine Skid Plate for 4Runner & Lexus GX460 Are you tired of worrying about underbody damage whil...
View full details
Save $-349.00
RIVAL Aluminum Transmission & Catalytic Converter Skid Plate: Toyota Hybrid Series 1/4-Inch Deep-Stamped Aluminum. No-Drill Installation. Anti...
View full details
Save $-349.00
RIVAL Aluminum Gas Tank Skid Plate for Toyota 4Runner & Lexus GX470 Are you worried about damaging your vehicle's vulnerable gas tank while ...
View full details
Sale
Rival 6th Gen 4Runner Skid Plates: Uncompromising Underbody Protection Revolutionary Engine Protection Are you worried about the vulnerability...
View full details
Save $-249.00
RIVAL 4X4 Aluminum Lower Control Arm (LCA) Skid Plates - GX550, LC250 & 6th Gen 4Runner Deep-Stamped 1/4" Aluminum. Concealed Hardware. 100% B...
View full details
Save $-249.00
RIVAL Aluminum Gas Tank Skid Plate - 2024-2026 Ford Ranger (incl. FX4) 1/4" Deep Stamped Alloy. 100% Bolt-On Security. Rust-Proof Fuel System Arm...
View full details
Save $100.00
RIVAL 4X4 Aluminum Lower Control Arm Skid Plates - Tacoma & 4Runner Deep Stamped 1/4" Aluminum. Lightweight Underbody Protection. No-Drill Ins...
View full details
Save $-349.00
RIVAL 4X4 Aluminum Transmission & Catalytic Converter Skid Plate 1/4-Inch Stamped Aluminum. Anti-Theft Protection. No-Drill Installation. M...
View full details
Save $-349.00
Rival 4Runner Transmission Skid Plate 2010-2024 | Corrosion-Resistant Aluminum Protection Deep-Stamped 1/4" Aluminum Alloy....
View full details
Save $-349.00
RIVAL Transmission Skid Plate for Tacoma, Land Cruiser & 4Runner Hybrid This high-quality, laser-cut RIVAL skid plate provides es...
View full details
Save $-199.00
Lightweight & Rust-Resistant RIVAL TRD Connection Skid Plate for Toyota 4Runner Are you concerned about the exposed gap in your 4Runner's un...
View full details
Save $-249.00
No-Drill Transfer Case Skid Plate for 2024+ Toyota Tacoma Are you looking for a lightweight yet durable skid pl...
View full details
Save $-249.00
Lightweight & Durable: RIVAL Catalytic Converter Skid Plate for 4Runner & GX550 Are you worried about the vulnerability of your 2025 4Ru...
View full details
Save $-249.00
Durable & Lightweight Aluminum Skid Plate for Land Cruiser, Lexus GX550, 6th Gen 4Runner Are you worried about damaging your Toyota Land Cru...
View full detailsWe are very happy the rack fits the painted roof of our ‘25 Bronco Heritage. Leitner right now might be the only company that makes a rack that fits the painted roof. Typical great Leitner attention to detail
We are very happy the rack fits the painted roof of our ‘25 Bronco Heritage. Leitner right now might be the only company that makes a rack that fits the painted roof. Typical great Leitner attention to detail.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I’ve had the full-length rack on my Grenadier for about a year, and it has performed flawlessly. Not only is the design simple and aesthetically pleasing, it is highly practical for carrying any load. I consistently have over 400 lbs mounted on my rack at all times, and even through multiple trips through the washboards of Death Valley at 45 mph, the rack has remained steady and strong, with not one fastener coming loose. I’d buy this rack ten times before I’d consider another brand.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I installed this on my M1102A trailer for organizing my camping gear and mounting my RTT and awning. It was a really easy install and was rock solid containing my gear down rugged dirt roads and washes last week. The sliding rear load bar was great for loading the motorcycles.
I’ve had the full-length rack on my Grenadier for about a year, and it has performed flawlessly. Not only is the design simple and aesthetically pleasing, it is highly practical for carrying any load. I consistently have over 400 lbs mounted on my rack at all times, and even through multiple trips through the washboards of Death Valley at 45 mph, the rack has remained steady and strong, with not one fastener coming loose. I’d buy this rack ten times before I’d consider another brand.
Limited space in bed. Now all my gear sits in the rack above. Made all the difference in what I can fit in this truck!!
needed something low profile but strong. This platform hit it out of the park. Put it on my ARE topper and couldn’t be happier! Assembly instructions could be clearer in showing top versus bottom, but got it together easy enough. Need to show the need for squaring up before mounting. Overall break pleased