BAK Revolver X2 2023-2024 GMC Canyon and Chevy Colorado 5.2ft Bed Tonneau Cover

The BAK Revolver X2, featuring exclusive automatic rotational locking rails that secure the cover the entire length of the bed on each side. This hard aluminum roll-up cover easily rolls up with one-handed operation and allows use of every inch of the truck bed without blocking your rear window. This cover does it all with unrivaled strength, security and style.

Flush Fit

The Revolver X2 conveniently works like a roll-up tonneau cover, but the clever design makes use without Velcro or snaps. This creates a flush fit design and simple usability.

Unmatched Security

BAK's patented Rotational Locking Rails allows the side mounting rails to automatically secure the cover to the truck bed when the cover is closed. A

locked tailgate keeps the truck bed fully locked down.

bak-revolver-x2-2021-ford-f150-dark-blue-03

No Restrictions

Simply roll the cover up to the cab for full-bed access without removing the cover. Stake pocket holes are always available, and the cover can be secured open while driving by using the two buckle straps at the front of the bed. The rear view mirror will not be blocked.

One-Handed Operation

Easy to use, automatic slam latches work by conveniently locking the cover to the rear mounting rails on both sides of the truck bed. Pulling the release cable from either side of the bed will unlatch the cover, making it ready to roll up.

Weather Resistant Design

The surface of the Revolver X2 is covered in vinyl so water cannot make its way through the aluminum slats. Weather resistant seals form a tight seal to the bed rails to help keep the elements out.

No-Drill Clamps

Installing the Revolver X2 is as simple as lining the rails up and tightening down the clamps. The cover bolts on at the front of the bed, then rolls out and latches to the rear of the bed. No special tools needed.

Key Features

Constructed of aluminum slats with vinyl overlay
No-drill installation
Patented rotational locking rails
Side rail seals with a smooth flat design
Rear Corner Caps for a more refined appearance
Felt Replacement Cap System
Integrated Bulkhead Seal for superior sealing
Operate from either side with automatic slam latch
Works with most 5th wheel hitches
Can hold 400 lbs of evenly distributed weight
Durable Safety Straps and buckles to secure cover when open
3 year warranty

Vehicle Fitment

2023-2024 Chevrolet Colorado- Bed Size 5'2"
2023-2024 GMC Canyon- Bed Size 5'2"
2015-2022 Chevrolet Colorado- Bed Size 5'2" and 6' 2"
2015-2022 GMC Canyon- Bed Size 5'2" and 6' 2"

Installation Guide

The Revolver X2 is an easy clamp on install. Get rolling with the Revolver in no time!

BAK Revolver Cover Installation Guide

Video

Warranty

BAK Industries ("BAK") warrants your Revolver X2 hard rolling truck bed cover to be structurally free from defects in material and workmanship for 3-Year Limited Warranty period from the retail date of purchase.

Warranty registration must be on file and/or proof of original purchase (detailed and dated receipt) is required for warranty service. Warranty is nontransferable and applies to the original purchaser of the BAK product only.

BAK reserves the right to determine whether a product needs to be repaired or replaced. No labor or service allowance is given or implied. The warranty will be void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, acts of God or normal wear and tear or other causes not arising out of defective materials or workmanship.

BAK assumes no liability for injury, loss, incidental or consequential damages. BAK reserves the right to substitute an entire replacement system or provide other remedies than those listed in this warranty for discontinued products or other reasons. Shipping charges will apply for any repair or replacement.

Please feel free to contact us at orders@extrailauto.com should you require any assistance with your product.

Filters

BAK