ASFIR 4X4 Toyota 4Runner 6th Gen Rock Sliders (2025-current)

Next-Gen Armor. 100% Bolt-On. Tested on Gas & Hybrid Models.

The Ultimate Shield for the 6th Gen 4Runner

The ASFIR 4X4 6th Gen Rock Sliders are the first line of defense for the all-new Toyota 4Runner platform. As the 2025+ models transition to more complex hybrid systems and high-tech components, protecting your lower body panels has never been more critical. We've engineered these sliders to handle the specific weight and geometry of the newest 4Runner.

Tested on both Gasoline and Full Hybrid EV (FHEV) models, these sliders offer a precision fit that respects the vehicle's sophisticated design while providing old-school, bomb-proof durability. Reinforced with a solid steel bar, they turn a vulnerable rocker panel into a structural asset.

The Problem & The Solution:

The Pain: The 6th Gen 4Runner features expensive new body lines and hybrid components. A single rock strike to the rocker panel can lead to a $4,000+ repair bill and potential sensor misalignment.
The ASFIR Solution: Our No-Drill, Chassis-Mounted sliders utilize factory mounting points to distribute impact forces across the frame, keeping your body panels pristine.

ASFIR 4X4 Toyota 4Runner 6th Gen Rock Sliders Main View

Key Features: 6th Gen 4Runner Armor

FHEV & Gas Compatible

Expertly tested on both the 2.4L Gas and 2.4L Full Hybrid EV models for a perfect fit around modern drivetrains.

Zero-Drill Installation

100% bolt-on assembly. Uses existing factory holes to ensure you don't void your new vehicle warranty or invite rust.

Hi-Lift Jack Support

The solid steel bar reinforcement makes these sliders fully compatible with Hi-Lift jacks for easier trail-side recovery.

Integrated Side Step

A functional step with enhanced grip that makes entering the cabin or accessing roof gear safe and simple.

Reinforced Steel Structure

95 lbs of heavy-duty steel protection designed to absorb and deflect high-velocity impacts on technical trails.

Durable Powder Coat

A tough, dual-stage textured finish protects against salt, mud, and road debris for long-lasting aesthetics.

Tested in Extreme Conditions

ASFIR 4X4 products are born in the desert. The 6th Gen sliders feature a solid steel bar reinforcement that sets them apart from hollow, aesthetics-only nerf bars. Weighing in at 95 lbs, they provide the necessary ballast and protection for the new 4Runner's weight distribution.

95 lbs

Built Heavy-Duty

100%

Bolt-On Design

2025+

Fitment Years

Israel

Origin

ASFIR 6th Gen 4Runner Rock Sliders Installation View

Early Adopter Feedback ★★★★★

"I just picked up my 2025 4Runner Hybrid and was terrified of damaging it on my first trip out. The ASFIR sliders fit like a glove. The bolt-on process took me about 90 minutes in the driveway, and they are incredibly solid. They even help my kids get into the back seat without slipping."

- David K., 2025 4Runner FHEV Owner

Protection vs. Depreciation Reality Check

$4,500+

6th Gen Rocker Repair

$2,500+

Hybrid Component Damage

$1,500+

Lower Door Reshell

One-Time

ASFIR 4X4 Investment

*Estimates based on brand-new 2025 component costs and dealership labor rates.*

ASFIR vs. Standard Nerf Bars

Feature	ASFIR 6th Gen Sliders	Standard Side Steps
Mounting Point	✓ Frame-Mounted (Structural)	✗ Body-Mounted (Weak)
Impact Resistance	✓ Solid Steel Reinforcement	✗ Hollow Aluminum/Plastic
Hybrid Compatibility	✓ Precision Fit for FHEV	✗ May interfere with lines
Installation	✓ No Drilling Required	Varies
Hi-Lift Jacking	✓ Recovery Rated	✗ Will Collapse

Fitment: 6th Generation 4Runner

Specifically engineered for the TNGA-F global truck platform used by the new 4Runner. Fits the following configurations:

2025 - 2026 Gas 2.4L Turbo

2025 - 2026 i-FORCE MAX Hybrid

Full Hybrid EV (FHEV) 2.4L Models

Note: Not compatible with older 5th Generation (2010-2024) 4Runners. Ensure your chassis type before ordering.

ASFIR 4X4 Toyota 4Runner 6th Gen Slider Chassis Mounting

Complete Bolt-On Armor Kit

Heavy-Duty Steel Sliders
Pair of Driver & Passenger side armor

Precision Brackets
Model-specific chassis mounting plates

Grade 10.9 Hardware Kit
High-tensile fasteners and brackets

Grip Traction Pads
Integrated anti-slip surface for stepping

CA Residents: ⚠️ WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Frequently Asked Questions

+ Will these fit the 2025 i-FORCE MAX Hybrid model?

Yes. These sliders have been specifically tested on the 2.4L Hybrid models. The mounting brackets are designed to clear the hybrid high-voltage cabling and battery housing while remaining securely attached to the chassis.

+ Is any drilling or cutting required?

No. These are true "Bolt-On" sliders. They utilize the factory mounting points on the 6th Gen 4Runner frame. No permanent modifications to your vehicle are necessary.

+ How much ground clearance will I lose?

Very little. The ASFIR sliders are designed to stay tucked high and tight to the rocker panels. While they sit slightly lower than the body to provide impact clearance, they are often level with or higher than other frame components like the exhaust or transmission skid.

+ Are these compatible with my Hi-Lift jack?

Absolutely. Unlike thin-walled side steps, these are heavy-duty steel rock sliders reinforced with a solid steel bar. They are designed to support the vehicle's weight during jacking or recovery operations.

+ Does the powder coat protect against rust?

Yes, the sliders feature a high-durability powder coat finish. However, if you "use" them on rocks and scrape the coating off, we recommend cleaning the area and applying a quick coat of touch-up paint to prevent surface oxidation.

Filters

4Runner Rock Sliders | Heavy-Duty Steel | Off-Road Protection

Let customers speak for us